Skip to content

Which of the records you hold can be filled in and turned into leads worth a person's time?

A customer record often holds a name, a transaction and an address, and little of what a salesperson needs. We check the records you hold and set aside the ones that should not be touched. We fill in the gaps we can support, score what is left and give your team a short queue with the source of every detail shown. A person approves the records, the route and the message before anything goes out.

Check one set of records See one record worked through

Free 20-minute fit call. We will clarify the right next step early.

For businesses that hold customer, order, delivery or enquiry records with gaps in them, and have a named person who can follow up a short list.

In this example the agent fills in and scores one record and passes it to your account owner. It sends nothing to the customer.

Read this example step by step

One customer record, filled in

The problem. A customer record often holds a company name and an order, and little a salesperson can act on. Filling it in by hand takes time nobody has, and a detail with no source is one nobody can check.

  1. The record is one you already hold: Northfield Example Supplies Ltd, a business customer with one site, two orders, the last on 14 March, and little else on file.
  2. The company name is matched to one entry on the public register of companies, which gives its status and company number, so that the rest is attached to that company.
  3. Before anything is added, the record is checked. It is not on your opt-out list, it is not a duplicate of another record, and where it came from is known. A record that failed any of these would be set aside, with the reason recorded.
  4. Only the fields you approved are filled in. What the company does comes from its own website and its published business contact route from its contact page, each captured on 2 October and shown with its source. A personal mobile number is not added, because it is not among the fields you approved. Details about a person are added on the basis of the permissions you hold, in the way you choose. The agent sends nothing.
  5. The record is scored. It has ordered twice and has had no contact since spring, so it is marked as worth a look first. The score is a reading for your team to judge, not a fact about the customer.
  6. It reaches Priya, your account owner, with every added detail and its source. She accepts it, defers it or rejects it, and decides whether anyone gets in touch.

The result. Priya starts with a record she can check line by line and a reason to look at it first. Nothing was added that you had not approved, and nobody outside your business was contacted.

What enrichment is

Enrichment adds what is missing to a record you already hold, from a source you can name. Two other jobs are often confused with it, and a record may need all three.

  • Enrich: add what is missing.
  • Cleanse: fix or remove what is wrong.
  • Verify: check that what is there still holds.

Why a large database is not a large opportunity

A record passes through four states before it is worth a person’s time. It is stored, because it sits in a system you hold. It may be contacted, if the way it was collected allows a follow-up on that channel. It is usable, if it is not a duplicate, has not opted out and holds enough to say who the customer is. And it is worth a conversation, if there is an honest reason to get in touch now.

Each state holds fewer records than the one before. That is why the audit comes first, and why records are sorted green, amber or red before any is used. The sorting is an operating starting point, not legal advice, and the basis for each record group is recorded with you before anything is sent.

How every record is handled

We agree one record group with you first: where it comes from, which fields matter and who will follow it up. Every record in it is then handled by the same eight rules.

  1. The record is matched to the right company or existing account before anything is added.
  2. One source is ranked first for each field; the others fill only what is still empty.
  3. A value your team entered is never overwritten; a different value is shown beside it for a person to accept.
  4. An empty result never clears a field.
  5. Every added value carries its source, its capture date and who approved the field; an AI reading is labelled as a reading.
  6. A record set aside keeps its reason (duplicate, opt-out, unclear source, out of segment) and stays visible.
  7. A published route is checked again before anyone uses it.
  8. Details about private individuals are added on the basis that you hold the permissions the person gave you, and are processed the way you choose.

One record, worked through

This is an example with an invented company, not a client's record. It is the record from the panel at the top of the page, shown as your team would receive it once the eight rules have run.

What your record held

Company
Northfield Example Supplies Ltd
Sites
One site
Orders
Two, the last on 14 Mar
Last contact
Spring
Account owner
Priya

Added

  • What it does

    Wholesale catering and cleaning supplies

    Source: company website · captured 2 Oct · field approved by you

  • Published business route

    General enquiries form

    Source: contact page on the company website · captured 2 Oct · field approved by you

Proposed change

  • Sites

    Your value, kept
    One site
    Other value
    Two sites
    Source: company website, captured 2 Oct

    Waiting for a person to accept or leave it

Not added

  • Personal mobile

    Not among the fields you approved.

Priya sees this card with every source and decides what happens next: whether to accept, defer or reject the record, and whether to accept or leave the proposed change. The contact route is checked again before anyone uses it, and the outcome is written back to your system. Nothing has been sent to the customer.

What stays with your team

Your named person decides who is contacted, and keeps pricing, objections, complaints and anything sensitive. You approve the record group, the sources, the channel, the message, how often it goes and when it stops. A score only sets the order of the list. It is not a judgement about the people on it.

How we start

We start with the audit on one set of records. You export the fields you can authorise, and we map them, count what is usable and look at what your current tools already do before proposing anything on top.

You then receive a recommendation, and it will be one of three: run a small pilot, repair the data first, or stop. If your existing tools already fill the gaps and score the records, we say so. If you hold only an old, finite database, the honest product is a one-off pilot, not a subscription.

A pilot is a finite queue worked by a person, with an outcome log, so the result is measured in your own system.

What happens to our system if we stop working with you?

It keeps running: where the architecture allows it, the infrastructure and data sit in your accounts, so leaving costs you our support, not your system.

How client protection works

Is this likely to fit?

The right place to start is a set of records you own, with a known source, some missing detail and a person ready to act on a short list.

A good fit

  • You hold customer, order, delivery or enquiry records, and some of what a salesperson needs is missing.
  • You can say where the records came from and how people were told they would be used.
  • A named person can follow up a short, ranked list and record what happened.
  • You can authorise the smallest set of other systems needed to fill the gaps.

Look at another option when

  • The records were bought, collected from a source nobody can name, or taken from a list you do not control.
  • The aim is to contact every record whatever its source, permission or relevance.
  • The records hold sensitive information about people. These stay out of the first scope.
  • A product you already use fills the gaps and scores the records well enough.
  • The request is for a guaranteed result, or for a legal ruling that the records may be used.

If what you need is wider than this, see business automation services. How we handle data and access is set out under Security and data.

What we can scope with you now

Each route starts from one kind of data you hold and ends with a named person. The audit comes first, because the size of a database is not its usable size. The queue and the three record fill-ins follow only where the audit finds records worth working. Where the next step is a follow-up on old quotes, orders or enquiries, that follow-up belongs to Quote & Service Recovery. There are no client results to show yet, so each route starts as a small pilot.

Data Gap & Contactability Audit

Any business holding customer, order, delivery or enquiry records with gaps in them.

Information used

A focused export of the records you hold, the fields in them and how each was collected.

What your team receives

A map of the systems and fields, a count of what is usable, a green, amber or red classification, exclusion rules and a recommendation to run a small pilot, repair the data first or stop.

Where it stops: The audit may conclude that nothing should be contacted. The classification is an operating starting point, not legal advice.

Prepared Lead Queue

Businesses with a sales or account team that can follow up a short, ranked list.

Information used

The approved record group, plus the other systems you authorise for the gaps to be filled.

What your team receives

A scored queue in which each entry shows what your record says, what was added and from where, why it may be worth a conversation, what was checked and left out, and who owns it.

Where it stops: A score decides where a person looks first. It is not a decision about the customer, and an added detail is a reading for your team to check.

Another way in

These routes suit a business that sells to companies, or holds order history or old enquiries, where the first job is to match each record, check it and fill what can be supported before a person follows it up.

What the labels mean: "ready to scope" is work we can define now, "other use case" is something we assess case by case on the fit call, and "exploratory pilot" is a small first project.

Exploratory pilot

Business Customer Record Fill-in

Businesses that sell to companies and hold company names with little else.

What the team receives

The legal entity matched to the right company, with its status, what the company says it does and a published business contact route, each with a source link and date.

Where it stops: Companies House does not check the accuracy of every item filed, so it identifies the company and is not proof for a sales claim. Public information does not show that anyone wants to be contacted.

Ask about this one

Exploratory pilot

Order & Delivery History Fill-in

For businesses holding order, delivery and account records, where the buyer is often only a name and an address.

What the team receives

Prepared records and a change report, handed to the Quote & Service Recovery follow-up or to an account owner's queue. Each added detail shows its source and capture date.

Where it stops: We work on the basis that you hold the permissions these records need, and process them the way you choose. Which practice suits your records is your decision.

Ask about this one

Exploratory pilot

Old Enquiry Fill-in

For businesses holding web, phone and email enquiries that never became a quote or a sale.

What the team receives

Prepared records, with the enquiry date and what was asked kept visible, handed to the Quote & Service Recovery follow-up.

Where it stops: An old enquiry is a reason to look, not proof of interest now. The follow-up itself belongs to Quote & Service Recovery, and a person decides who is contacted.

Ask about this one

Sources and safeguards

How we keep the work controlled Reads the records you approve, removes duplicates and flags missing fields and unclear sources

What the system does

  • Reads the records you approve, removes duplicates and flags missing fields and unclear sources
  • Fills in gaps from the sources you have authorised and shows where each detail came from
  • Scores and orders the records by the rules you agree, and keeps what it set aside visible

What stays with your team

  • Approve the record group, the sources used, the contact route, the message and how often it goes, before anything is sent
  • Decide who is contacted, and keep pricing, objections, complaints and anything sensitive
  • Own the basis on which each record group may be used, checked against how the data was collected

The safeguards

  • We start with the fields needed to say what a record is, what is missing and who owns the follow-up, and leave the rest alone.
  • Bought lists, records of unknown source and anyone who has objected or opted out are left out.
  • Nothing is sent until you have approved the record group, the channel, the message, how often it goes and when it stops.
  • Your records stay yours. We tell you where they go and why, and share no more than the work needs.
Our sources and what they show The public company register can identify a company, but it cannot vouch for everything filed on it.

The public company register can identify a company, but it cannot vouch for everything filed on it.

Companies House: search the register

What it supports
The register gives a company's legal name, number, status, registered office and filing history.
What it does not prove
Companies House states that it does not check the accuracy of every item filed. We use it to match the company, not as evidence for a sales claim.

Questions owners ask before they book

The same answers as on the full FAQ page.

What is data enrichment?

Enrichment adds missing details to records you already hold, such as what a company does or its published business contact route, and shows where each added detail came from. Your team sees every proposed change and decides which ones to keep.

Open in the full FAQ

Is enrichment the same as cleaning our CRM?

Not quite: enrichment adds what is missing, cleansing fixes or removes what is wrong, and verification checks that what is there still holds. A record may need all three, and a value your team entered is only replaced if someone approves the change.

Open in the full FAQ

Do you buy contact details?

No: we do not use bought or unproven lists, and business records are filled from the public register and the company's own website. For private individuals, details are added on the basis that you hold the permissions the person gave you, processed the way you choose, and every value shows where it came from.

Open in the full FAQ

Will you message people who never asked to hear from us?

Only contacts on a route you have approved, and the basis for each contact list is recorded with you before any message is sent. The work is designed not to decide whom you may lawfully contact.

Open in the full FAQ

What decisions does the AI make on its own?

In approved B2B sales and first-party recovery campaigns, rules and AI can check, match, summarise, send the agreed messages, run routine follow-ups, classify replies and route work. Research and evidence workflows start read-only or draft-only; audience and channel policy, pricing, negotiation, technical, safety, clinical, legal, regulatory and professional decisions stay with a named person.

Open in the full FAQ

Does this replace my salespeople?

No. Your team keeps pricing, negotiation, the relationship and the sale, while the workflow prepares the signals and routine follow-up and hands genuine interest to a named person.

Open in the full FAQ

Does anything happen fully automatically, with no human involved?

Routine messages can go out without a person reading each one, but only inside a scheme your team has approved in advance. Every workflow has a named owner and a defined escalation and review point, anything outside the scheme is held for a person, and special-category data never gets a solely automated decision.

Open in the full FAQ

Will this make us GDPR compliant?

No supplier can hand you compliance, and we won't claim to. What we can do is design the data flow, retention and access controls so your own compliance work has less to fight.

Open in the full FAQ

Would you ever tell us not to automate something?

Yes, and we'd rather say it early: sometimes the honest answer is fix the process first, keep the platform you have, or that a step needs a person.

Open in the full FAQ

What do the new sales, recovery and evidence products cost?

Each engagement is scoped individually, so there is no price list for these products yet. The fit call is free, and if work can be scoped you get a written price before anything starts.

Open in the full FAQ

What do you need from me to get started?

Nothing is required in advance. The first step is a free 20-minute call to understand the current setup.

Open in the full FAQ

Bring us one set of records and the person who would follow them up.

We will check what is usable, what can be filled in and whether any follow-up is worth starting.

Free 20-minute fit call. We will clarify the right next step early.

Check one set of records